- File type
- Gearbox
- Brand
- Audi
- Car model
- A6
- Hardware number
- 01J927156JG
- ECU
- VL300
- Software number
- 4F2910155H 0010
- Read with
- PCM FLASH
- 01J927156JG_4F2910155H_0010_flash-20240927-125027.bin524.288 bytes
- 4F2910155H_0010_eeprom-20240927-125047.bin2.048 bytes
AUDI A6 GEARBOX VL300 01J927156JG 4F2910155H 0010 DUMP
Gearbox / transmission control unit file for the Audi A6 (VL300). HW 01J927156JG / SW 4F2910155H 0010. Read with PCM FLASH. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
- Imunify360 real-time scanning
Description
AUDI A6 GEARBOX VL300 01J927156JG 4F2910155H 0010 DUMP is a gearbox / transmission control unit file for the Audi A6 fitted with the VL300 engine control unit. It matches hardware number 01J927156JG and software number 4F2910155H 0010. The file was read with PCM FLASH and is supplied exactly as read from the unit, byte for byte.
Typical use: TCU programming, recovery after a failed flash, or module replacement. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 4F2910155H 0010, or a file that is not listed? Send us a file request and we will source it for you.
AUDI A6 GEARBOX VL300 01J927156JG 4F2910155H 0010
FLASH+EEPROM DUMP