- File type
- Gearbox
- Brand
- Audi
- Car model
- A6
- Hardware number
- 0AW927156K
- ECU
- VL381
- Software number
- 4G1927155P 0004
- Read with
- FLEX, X17 MAGPRO
- DFLASH_VL381F.bin131.072 bytes
- EXT_EEPROM_VL381F.bin8.192 bytes
- PFLASH_VL381F.bin1.540.096 bytes
- A6 VL381 ID.txt486 bytes
- CLONE_FULL_BACKUP_VL381F.bin2.241.490 bytes
- vag_temic_vl381_bench_fullbackup_000000000d00b66f8206001027…420.272 bytes
- vag_temic_vl381_bench_fullbackup_000000000d00b66f8206001027…1.540.096 bytes
- vag_temic_vl381_bench_fullbackup_000000000d00b66f8206001027…131.072 bytes
- vag_temic_vl381_bench_fullbackup_000000000d00b66f8206001027…8.192 bytes
AUDI A6 GEARBOX VL381 0AW927156K 4G1927155P 0004 DUMP
Gearbox / transmission control unit file for the Audi A6 (VL381). HW 0AW927156K / SW 4G1927155P 0004. Read with FLEX. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
- Imunify360 real-time scanning
Description
Gearbox control unit dump from an Audi A6 with the VL381 transmission, read with Flex and X17 Magpro. It’s a TCU file, not an engine ECU. Match hardware 0AW927156K, part number 4G1927155P and index 0004.
The index is what separates this file from its neighbours. The same 4G1927155P part exists as the index 0002 dump, and the board also carries other part numbers, such as the 4G1927155T 0003 dump. Read the full label before choosing.
A stock TCU dump is typically used to recover a unit after a failed write or to prepare a replacement. Expect to run the gearbox adaptations afterwards. All reads on this hardware are under 0AW927156K files, and the VL381 list covers the rest of the family.
AUDI A6 GEARBOX VL381 0AW927156K 4G1927155P 0004 DUMP is a gearbox / transmission control unit file for the Audi A6 fitted with the VL381 engine control unit. It matches hardware number 0AW927156K and software number 4G1927155P 0004. The file was read with FLEX and is supplied exactly as read from the unit, byte for byte.
Typical use: TCU programming, recovery after a failed flash, or module replacement. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 4G1927155P 0004, or a file that is not listed? Send us a file request and we will source it for you.
ASAM: EV_TCMVL381
ASAM ver: A02433
CVN: 00001D86
SW: 4G1927155P
SW version: 0004
HW: 0AW927156K
HW version: H07
Type: 0AW_20TDI_RdW
VAG System Name: J217
FULL+P FLASH+D FLASH+EEPROM DUMP
Specification
Reviews
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.