- File type
- Gearbox
- Brand
- Audi
- Car model
- ALL
- Hardware number
- 0B5927156F
- ECU
- DL501
- Software number
- 8K1927156G 0008
- Read with
- FLEX
- vag_temic_dl501gen1_bench_fullbackup_000000000fc02b23820600…458.624 bytes
- vag_temic_dl501gen1_bench_fullbackup_000000000fc02b23820600…1.540.096 bytes
- vag_temic_dl501gen1_bench_fullbackup_000000000fc02b23820600…131.072 bytes
- vag_temic_dl501gen1_bench_fullbackup_000000000fc02b23820600…8.192 bytes
AUDI GEARBOX DL501 0B5927156F 8K1927156G 0008 DUMP
Gearbox / transmission control unit file for Audi, all models, DL501 ECU. HW 0B5927156F / SW 8K1927156G 0008. Read with FLEX. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
- Imunify360 real-time scanning
Description
AUDI GEARBOX DL501 0B5927156F 8K1927156G 0008 DUMP is a gearbox / transmission control unit file for Audi, all models, fitted with the DL501 engine control unit. It matches hardware number 0B5927156F and software number 8K1927156G 0008. The file was read with FLEX and is supplied exactly as read from the unit, byte for byte.
Typical use: TCU programming, recovery after a failed flash, or module replacement. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 8K1927156G 0008, or a file that is not listed? Send us a file request and we will source it for you.
AUDI GEARBOX DL501 0B5927156F 8K1927156G 0008
FULL+P FLASH+D FLASH+EEPROM DUMP