Fiat Instant download
File type
Original File
Brand
Fiat
Car model
TIPO-EGEA
Hardware number
0261S12801
Software number
10SW023433
Read with
FLEX, NEW TRASDATA
Inside the download
  • 0261S12801 EEPROM OK.e2p65.536 bytes
  • 0261S12801 İNFO.txt669 bytes
  • 0261S12801 FULL OK.dim744.235 bytes
  • 0261S12801 MPC OK.mpc1.572.864 bytes
  • fal_bosch_me17.3.0_bench_fullbackup_4180920d1580a9081404002…746.576 bytes
  • fal_bosch_me17.3.0_bench_fullbackup_4180920d1580a9081404002…2.097.152 bytes
  • fal_bosch_me17.3.0_bench_fullbackup_4180920d1580a9081404002…131.072 bytes

FIAT EGEA ME17.3.0 0261S12801 10SW023433 DUMP

Original (stock) ECU file for the Fiat TIPO-EGEA (ME17.3.0). HW 0261S12801 / SW 10SW023433. Read with FLEX. Instant download after payment.

25,00€

  • Instant download — the file is available the moment payment clears.
  • Kept in your account — re-download any time from My Account.
  • Read from a real unit — listed by the exact hardware and software number.

Need a different version or hardware number? Request the file, we usually source it the same day.

Malware-protected downloadsSecurityEvery uploaded file is checked by real-time malware scanning on our server.
  • Imunify360 real-time scanning
About this file

Description

A stock ME17.3.0 read from a Fiat Egea (Tipo), made with Flex and New Trasdata. Your ECU should show hardware 0261S12801 and software 10SW023433. Nothing in the calibration has been edited, so it matches a factory unit.

Egea units on 0261S12801 exist with several software versions, many starting with 10SW005062, so check your read before writing. The file is for recovering after a failed flash, returning to stock or keeping a baseline. Nearby versions include the 0261S12801 10SW005062 10SW051868 dump, and the full set is on the 0261S12801 page. If a flash failed partway, our recovery guide explains the next steps.

FIAT EGEA ME17.3.0 0261S12801 10SW023433 DUMP is an original (stock) ECU file for the Fiat TIPO-EGEA fitted with the ME17.3.0 engine control unit. It matches hardware number 0261S12801 and software number 10SW023433. The file was read with FLEX and is supplied exactly as read from the unit, byte for byte.

Typical use: restoring a damaged or corrupted ECU to factory software, recovering after a failed flash, or as a clean base before any modification. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.

After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 10SW023433, or a file that is not listed? Send us a file request and we will source it for you.


Hardware Nr.: 0261S12801
Software Nr.: 10SW023433
Software Upgrade Nr.:
Chassis Number:
Spare Part Number: 55268853

10SW005062

10SW023433

FULL+MPC+EEPROM DUMP

Technical data

Specification

File typeOriginal File
BrandFiat
Car modelTIPO-EGEA
Hardware number0261S12801
ECU modelME17.3.0
Software number10SW023433
Read withFLEX, NEW TRASDATA
SKUECUFILE-358356106
File0261S12801 EEPROM OK.e2p 65.536 bytes
File0261S12801 İNFO.txt 669 bytes
File0261S12801 FULL OK.dim 744.235 bytes
File0261S12801 MPC OK.mpc 1.572.864 bytes
Filefal_bosch_me17.3.0_bench_fullbackup_4180920d1580a9081404002000000000_20250104131756_fullbackup.mmf 746.576 bytes
Filefal_bosch_me17.3.0_bench_fullbackup_4180920d1580a9081404002000000000_20250104131756_int_flash.bin 2.097.152 bytes
Filefal_bosch_me17.3.0_bench_fullbackup_4180920d1580a9081404002000000000_20250104131756_int_eeprom.bin 131.072 bytes
Customer feedback

Reviews

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Related files

Files for hardware number 0261S12801

See all 7 files for 0261S12801 »

Related files

More ME17.3.0 ECU files

See all 15 files for ME17.3.0 »

Guides

Guides for this file