- File type
- Original File
- Brand
- Mercedes-Benz
- Car model
- SPRINTER
- Hardware number
- 6519013502
- ECU
- CRD3P.B0
- Software number
- 6519030249
- Read with
- FLEX
- mb_delphi_crd3x.x_tc1793_bench_fullbackup_43808905106028460…1.822.928 bytes
- mb_delphi_crd3x.x_tc1793_bench_fullbackup_43808905106028460…4.194.304 bytes
- mb_delphi_crd3x.x_tc1793_bench_fullbackup_43808905106028460…32.768 bytes
- ID.txt115 bytes
MERCEDES SPRINTER CRD3P.B0 6519013502 6519030249 DUMP
Original (stock) ECU file for the MERCEDES-BENZ SPRINTER (CRD3P.B0). HW 6519013502 / SW 6519030249. Read with FLEX. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
Description
MERCEDES SPRINTER CRD3P.B0 6519013502 6519030249 DUMP is an original (stock) ECU file for the MERCEDES-BENZ SPRINTER fitted with the CRD3P.B0 engine control unit. It matches hardware number 6519013502 and software number 6519030249. The file was read with FLEX and is supplied exactly as read from the unit, byte for byte.
Typical use: restoring a damaged or corrupted ECU to factory software, recovering after a failed flash, or as a clean base before any modification. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 6519030249, or a file that is not listed? Send us a file request and we will source it for you.
HW PN: 6519013502
Boot PN: 6519042500
Prog PN: 6519027502
Calibration PN: 6519030249
ECU version: CRD3xx_TC1793
FULL+MPC+EEPROM DUMP
