- File type
- Original File
- Brand
- Mitsubishi
- Car model
- L200
- Hardware number
- H19ERA6
- ECU
- DENSO
- Software number
- 1860C18403
- Read with
- FLEX
- mitsubishi_denso_ra6_bench_fullbackup_20240919144554_fullba…466.928 bytes
- mitsubishi_denso_ra6_bench_fullbackup_20240919144554_int_fl…1.048.576 bytes
- mitsubishi_denso_ra6_bench_fullbackup_20240919144554_ext_ee…2.048 bytes
MITSUBISHI L200 DENSO H19ERA6 1860C18403 DUMP
Original (stock) ECU file for the MITSUBISHI L200 (DENSO). HW H19ERA6 / SW 1860C18403. Read with FLEX. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
Description
MITSUBISHI L200 DENSO H19ERA6 1860C18403 DUMP is an original (stock) ECU file for the MITSUBISHI L200 fitted with the DENSO engine control unit. It matches hardware number H19ERA6 and software number 1860C18403. The file was read with FLEX and is supplied exactly as read from the unit, byte for byte.
Typical use: restoring a damaged or corrupted ECU to factory software, recovering after a failed flash, or as a clean base before any modification. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 1860C18403, or a file that is not listed? Send us a file request and we will source it for you.
HW H19ERA6
SW T1D0HED0J101
UPG.SW 1860C18403
FULL+MPC+EEPROM DUMP
Specification
Reviews (1)
Based on 1 review
Only logged in customers who have purchased this product may leave a review.
Marvi (verified owner) –
quick response.
Marvi –