Instant download

File type: Original File
Brand: Toyota
Car model: COROLLA
Hardware number: 0281031999
ECU: EDC17CP07
Software number: 1037536734
Read with: NEW TRASDATA

Inside the download

COROLLA EDC17CP37 EEPROM BENCH OK.e2p32.768 bytes
COROLLA EDC17CP37 FULL BENCH OK.dim709.428 bytes
COROLLA EDC17CP37 İNFOO.txt550 bytes
COROLLA EDC17CP37 DTF BENCH OK.dtf1.540.096 bytes
COROLLA EDC17CP37 MPC BENCH OK.mpc1.540.096 bytes

TOYOTA COROLLA EDC17CP07 0281031999 1037536734 DUMP

Original (stock) ECU file for the TOYOTA COROLLA (EDC17CP07). HW 0281031999 / SW 1037536734. Read with NEW TRASDATA. Instant download after payment.

20,00€

Instant download — the file is available the moment payment clears.
Kept in your account — re-download any time from My Account.
Read from a real unit — listed by the exact hardware and software number.

Need a different version or hardware number? Request the file, we usually source it the same day.

Malware-protected downloadsSecurityEvery uploaded file is checked by real-time malware scanning on our server.

Imunify360 real-time scanning

About this file

Description

What you get: the original, untouched read of a Bosch EDC17CP07 from a Toyota Corolla, made on New Trasdata. Confirm hardware 0281031999 on the case label and software 1037536734 in your read before downloading.

Use it to rebuild an ECU that stopped responding after a write, or to put stock software back on a unit someone else modified. Other Corolla units in this family use different hardware such as 0281017226 or 0281016911, so don’t assume a match by car model alone. It comes from another car, so immobiliser matching may be needed. Browse all files on 0281031999 and the EDC17CP07 list. For recovery steps, see our failed flash guide.

TOYOTA COROLLA EDC17CP07 0281031999 1037536734 DUMP is an original (stock) ECU file for the TOYOTA COROLLA fitted with the EDC17CP07 engine control unit. It matches hardware number 0281031999 and software number 1037536734. The file was read with NEW TRASDATA and is supplied exactly as read from the unit, byte for byte.

Typical use: restoring a damaged or corrupted ECU to factory software, recovering after a failed flash, or as a clean base before any modification. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.

After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 1037536734, or a file that is not listed? Send us a file request and we will source it for you.

FULL+MPC+EEPROM DUMP