- File type
- Gearbox
- Brand
- VW
- Car model
- CADDY
- Hardware number
- 0AM927769D
- ECU
- DQ200D20
- Software number
- 0AM300060H 3650
- Read with
- FLEX, X17 MAGPRO
- EXT_EEPROM_DQ200.bin8.192 bytes
- ID.txt314 bytes
- CLONE_FULL_BACKUP_DQ200.bin2.241.489 bytes
- PFLASH_DQ200.bin1.540.096 bytes
- DFLASH_DQ200.bin131.072 bytes
- vag_temic_dq200-mqb_bench_fullbackup_0000000009c0a086820600…540.608 bytes
- vag_temic_dq200-mqb_bench_fullbackup_0000000009c0a086820600…1.540.096 bytes
- vag_temic_dq200-mqb_bench_fullbackup_0000000009c0a086820600…131.072 bytes
- vag_temic_dq200-mqb_bench_fullbackup_0000000009c0a086820600…8.192 bytes
VW CADDY GEARBOX DQ200 0AM927769D 0AM300060H 3650 DUMP
Gearbox / transmission control unit file for the VW CADDY (DQ200D20). HW 0AM927769D / SW 0AM300060H 3650. Read with FLEX. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
- Imunify360 real-time scanning
Description
A gearbox (TCU) dump from the DQ200 mechatronic in a VW Caddy, read with Flex and X17 Magpro. The unit carries hardware 0AM927769D, with software part number 0AM300060H at index 3650.
0AM927769D is used across many VAG cars with different software, so check that 0AM300060H and index 3650 appear in your read. A dump like this helps when replacing a mechatronic unit or repairing one after a failed write; clutch and gear adaptations still have to be run afterwards. Compare the Passat DQ200 0AM300054L dump or browse the 0AM927769D list. Our DQ200 TCU guide covers the process.
VW CADDY GEARBOX DQ200 0AM927769D 0AM300060H 3650 DUMP is a gearbox / transmission control unit file for the VW CADDY fitted with the DQ200D20 engine control unit. It matches hardware number 0AM927769D and software number 0AM300060H 3650. The file was read with FLEX and is supplied exactly as read from the unit, byte for byte.
Typical use: TCU programming, recovery after a failed flash, or module replacement. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 0AM300060H 3650, or a file that is not listed? Send us a file request and we will source it for you.
VW CADDY GEARBOX DQ200 0AM927769D 0AM300060 H 3650
FULL+P FLASH+D FLASH+EEPROM DUMP
Specification
Reviews
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.