- File type
- Original File
- Brand
- VW
- Car model
- CRAFTER
- Hardware number
- 04L907445P
- ECU
- DCM6.2V
- Software number
- 04L906056SK 6953
- Read with
- NEW TRASDATA
- DCM6.2V ID.txt537 bytes
- DCM6.2V FULL_OK.dim1.964.583 bytes
- DCM6.2V MPC_OK.mpc4.227.072 bytes
- DCM6.2V EEPROM_OK.e2p114.688 bytes
VW CRAFTER DCM6.2V 04L907445P 04L906056SK 6953 DUMP
Original (stock) ECU file for the VW CRAFTER (DCM6.2V). HW 04L907445P / SW 04L906056SK 6953. Read with NEW TRASDATA. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
Description
VW CRAFTER DCM6.2V 04L907445P 04L906056SK 6953 DUMP is an original (stock) ECU file for the VW CRAFTER fitted with the DCM6.2V engine control unit. It matches hardware number 04L907445P and software number 04L906056SK 6953. The file was read with NEW TRASDATA and is supplied exactly as read from the unit, byte for byte.
Typical use: restoring a damaged or corrupted ECU to factory software, recovering after a failed flash, or as a clean base before any modification. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 04L906056SK 6953, or a file that is not listed? Send us a file request and we will source it for you.
04L 907 445 P
Hardware Nr.: DAUA
Software Nr.: 04L906056SK
Software Upgrade Nr.: 04L906056SK 6953
System Type: EV_ECM20TDI03004L906056SK
FULL+MPC+EEPROM DUMP
