Mercedes-Benz Instant download
File type
Virgin
Car model
W639 VITO
Hardware number
0281015058
Software number
1037391218
Read with
FLEX, KTAG
Inside the download
  • 0281015058 MPC.mpc528.384 bytes
  • EDC16CP31 RENEW OK2.097.152 bytes
  • mb_bosch_edc16cp31_bench_fullbackup_20260701121659_int_flas…524.800 bytes
  • mb_bosch_edc16cp31_bench_fullbackup_20260701121659_ext_flas…2.097.152 bytes

MERCEDES VITO W639 EDC16CP31 0281015058 1037391218 VIRGIN DUMP

Virgin (reset) file for the MERCEDES-BENZ W639 VITO (EDC16CP31). HW 0281015058 / SW 1037391218. Read with FLEX. Instant download after payment.

30,00€

  • Instant download — the file is available the moment payment clears.
  • Kept in your account — re-download any time from My Account.
  • Read from a real unit — listed by the exact hardware and software number.

Need a different version or hardware number? Request the file, we usually source it the same day.

Malware-protected downloadsSecurityEvery uploaded file is checked by real-time malware scanning on our server.
  • Imunify360 real-time scanning
About this file

Description

EDC16CP31 virgin file for the Mercedes Vito W639. Match hardware 0281015058 on the label and software 1037391218 in the read. It was read with Flex and KTAG. The immobiliser data is reset, so a used ECU with these numbers can be taught to a different Vito.

Write it to the replacement unit, fit it, then run the key or immobiliser learning procedure with your diagnostic equipment. If you only need stock software back on the original van, take the original 0281015058 1037391218 dump instead.

Our EDC16C7 and EDC16CP31 immo off and virgin guide covers the process. Also see the Vito 0281015918 virgin file and all EDC16CP31 files.

MERCEDES VITO W639 EDC16CP31 0281015058 1037391218 VIRGIN DUMP is a virgin (reset) file for the MERCEDES-BENZ W639 VITO fitted with the EDC16CP31 engine control unit. It matches hardware number 0281015058 and software number 1037391218. The file was read with FLEX and is supplied exactly as read from the unit, byte for byte.

Typical use: putting the module back to a like-new state so it can be adapted or coded to another vehicle. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.

After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 1037391218, or a file that is not listed? Send us a file request and we will source it for you.


MERCEDES VITO W639 EDC16CP31 0281015058 1037391218 VIRGIN DUMP

MPC+VIRGIN FLASH DUMP

AUTOMATIC GEAR

Technical data

Specification

File typeVirgin
BrandMercedes-Benz
Car modelW639 VITO
Hardware number0281015058
ECU modelEDC16CP31
Software number1037391218
Read withFLEX, KTAG
SKUECUFILE-212065898
File0281015058 MPC.mpc 528.384 bytes
FileEDC16CP31 RENEW OK 2.097.152 bytes
Filemb_bosch_edc16cp31_bench_fullbackup_20260701121659_int_flash.bin 524.800 bytes
Filemb_bosch_edc16cp31_bench_fullbackup_20260701121659_ext_flash_VİRGİN_OK.bin 2.097.152 bytes
Customer feedback

Reviews

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Related files

Other files for software number 1037391218

Related files

More EDC16CP31 ECU files

See all 104 files for EDC16CP31 »

Guides

Guides for this file