- File type
- Gearbox
- Brand
- VW
- Car model
- PASSAT
- ECU
- DQ200
- Software number
- 0AM300048L 9034
- Read with
- X17 MAGPRO
- CLONE_FULL_BACKUP_DQ200 1.4 TSİ UFUK2.241.489 bytes
- DFLASH_DQ200.bin131.072 bytes
- EXT_EEPROM_DQ200.bin8.192 bytes
- PFLASH_DQ200 1.4 TSİ1.540.096 bytes
VW PASSAT GEARBOX DQ200 0AM300048L 9034 DUMP
Gearbox / transmission control unit file for the VW PASSAT (DQ200). SW 0AM300048L 9034. Read with X17 MAGPRO. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
- Imunify360 real-time scanning
Description
VW PASSAT GEARBOX DQ200 0AM300048L 9034 DUMP is a gearbox / transmission control unit file for the VW PASSAT fitted with the DQ200 engine control unit. It matches software number 0AM300048L 9034. The file was read with X17 MAGPRO and is supplied exactly as read from the unit, byte for byte.
Typical use: TCU programming, recovery after a failed flash, or module replacement. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 0AM300048L 9034, or a file that is not listed? Send us a file request and we will source it for you.
VW PASSAT GEARBOX DQ200 0AM300048L 9034
FULL+P FLASH+D FLASH+EEPROM DUMP
Specification
Reviews
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.