- File type
- Original File
- Brand
- Volkswagen
- Car model
- TRANSPORTER
- ECU
- EDC17CP20
- Software number
- 03L906019GG 3313
- Hardware number
- 0281017553
- MPC_OK.MPC2.097.152 bytes
- FULL_OK1.154.526 bytes
- EEPROM_OK.EPR131.072 bytes
- volkswagen_edc17cp20_boot_fullbackup_418403830a408f42821600…1.058.096 bytes
- volkswagen_edc17cp20_boot_fullbackup_418403830a408f42821600…2.097.152 bytes
- volkswagen_edc17cp20_boot_fullbackup_418403830a408f42821600…131.072 bytes
- volkswagen_edc17cp20_boot_fullbackup_418403830a408f42821600…2.489 bytes
VW TRANSPOTER EDC17CP20 0281017553 03L906019GG 3313 1037515577 1037524687 DUMP
Original (stock) ECU file for the Volkswagen TRANSPORTER (EDC17CP20). HW 0281017553 / SW 03L906019GG 3313. Read with FLEX. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
- Imunify360 real-time scanning
Description
An original EDC17CP20 dump from a VW Transporter, read with Flex and KTAG. Check hardware 0281017553, part number 03L906019GG with index 3313, and software 1037515577 and 1037524687.
03L906019GG exists with several indexes on the same board, and they carry different software. The 03L906019GG 9977 dump is one of them, and the 03L906019FK 8494 dump is another Transporter variant. If your index isn’t 3313, choose the matching file from 0281017553 files.
This stock file is used to recover an ECU after a failed flash or to put a replacement unit on the correct data. Our EDC17CP20 guide covers this ECU on Transporter, Amarok, Crafter and Audi models, with notes on the tools used.
VW TRANSPOTER EDC17CP20 0281017553 03L906019GG 3313 1037515577 1037524687 DUMP is an original (stock) ECU file for the Volkswagen TRANSPORTER fitted with the EDC17CP20 engine control unit. It matches hardware number 0281017553 and software number 03L906019GG 3313. The file was read with FLEX and is supplied exactly as read from the unit, byte for byte.
Typical use: restoring a damaged or corrupted ECU to factory software, recovering after a failed flash, or as a clean base before any modification. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 03L906019GG 3313, or a file that is not listed? Send us a file request and we will source it for you.
VW TRANSPOTER EDC17CP20 0281017553 03L906019GG 3313 1037515577 1037524687
FULL+MPC+EEPROM DUMP
Specification
Reviews
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Guides for this file
- Bosch EDC17CP20 ECU Guide: VW Transporter, Amarok, Crafter and Audi A4, A6 Files and Tools
- Original File, Virgin File or FRF: Which ECU File Do You Actually Need?
- Bricked ECU After a Failed Flash? Step-by-Step Recovery With an Original File
- How to Read Your ECU Label: Hardware Number, Software Number and Part Number Explained
There are no reviews yet.