- File type
- Original File
- Brand
- VW
- Car model
- CRAFTER
- Hardware number
- 0281017663
- ECU
- EDC17C54
- Software number
- 03L906012D 7140
- Read with
- FLEX
- volkswagen_edc17c54_bench_fullbackup_41008a0408c08b97740800…1.043.600 bytes
- volkswagen_edc17c54_bench_fullbackup_41008a0408c08b97740800…4.194.304 bytes
- volkswagen_edc17c54_bench_fullbackup_41008a0408c08b97740800…131.072 bytes
VW CRAFTER EDC17C54 0281017663 03L906012D 7140 1037542240 DUMP
Original (stock) ECU file for the VW CRAFTER (EDC17C54). HW 0281017663 / SW 03L906012D 7140. Read with FLEX. Instant download after payment.
25,00€
- Instant download — the file is available the moment payment clears.
- Kept in your account — re-download any time from My Account.
- Read from a real unit — listed by the exact hardware and software number.
Need a different version or hardware number? Request the file, we usually source it the same day.
Description
VW CRAFTER EDC17C54 0281017663 03L906012D 7140 1037542240 DUMP is an original (stock) ECU file for the VW CRAFTER fitted with the EDC17C54 engine control unit. It matches hardware number 0281017663 and software number 03L906012D 7140. The file was read with FLEX and is supplied exactly as read from the unit, byte for byte.
Typical use: restoring a damaged or corrupted ECU to factory software, recovering after a failed flash, or as a clean base before any modification. Before writing the file, confirm that the hardware and software numbers printed on your ECU label match the numbers above; writing a file to a unit with different numbers can damage the ECU.
After secure checkout the file is available for instant download from your AutoECUFile account, and it stays there for later downloads. Need another version of 03L906012D 7140, or a file that is not listed? Send us a file request and we will source it for you.
VW CRAFTER EDC17C54 0281017663 03L906012D 7140 1037542240
FULL+MPC+EEPROM DUMP